INSIPIRED TO IMPROVE ORAL HEALTH®

Bond/Etch

Blue Micro tip

#1436 - 500pk

Inspiral Brush tip

#1033-I - 500p

• High bond strengths to both dentin and enamel

• Optimal viscosity

• Resin cures with all lights

• Virtually eliminates post-op sensitivity

• Convenience of unit-dose delivery without the waste

Peak LC Bond Resin is a syringe-delivered, light-cured resin bonding adhesive. It is uniquely designed for use either following conditioning with Peak SE Primer or Ultra-Etch phosphoric acid for a total etch technique. Peak LC Bond Resin contains an ethyl alcohol solvent and is 7.5% radiopaque filler. It will cure with all quality curing lights, including LEDs.

Peak SE Primer is a self-etching primer mixed and delivered in the unique JetMix syringe. JetMix technology separates precise quantities of strong 1.2pH acid and optimized priming resin to prevent the hydrolytic breakdown and degradation that occurs with other self-etch chemistries. Components are kept separate until the clinician activates them. Peak SE Primer is used with Peak LC Bond Resin to achieve unsurpassed bond strengths.

USES

For use in all light-accessible bonding procedures, the Peak Adhesive System can also be used for immediate dentin sealing prior to impressions and temporization in order to decrease post-op and cementation sensitivity.

Peak™ SE Primer

SELF-ETCHING

Black Mini Brush tip

#1432 - 500pk

Inspiral Brush tip

#1033-I - 500pk

• Fresh, stable chemistry

• Easy, one-coat technique

• Convenient, precise placement

• No need for mixing wells or brushes

Highest bond strength to chemical cure composite.

Peak™ Self-Etch Adhesive System

Peak™ LC Bond

Bond Resin

Independent university research establishes

Peak’s superiority in etching and bonding

AADR Abstract ID #08251

Bond Strengths of Self-Etching Bonding Systems to Dentin and Enamel - R.B. PRICE, M. MCLEOD, and C.M. FELIX, Dalhousie University, Halifax, Canada

University Study. August 2007

Micrograph of cut enamel treated with Peak SE Primer. Note the keyhole appearance of the etched enamel rods

Micrograph of cut enamel treated

with Clearfil SE Bond.

Micrograph of cut enamel treated

with Adper Prompt L-Pop.

Trust Peak’s JetMix™ Syringe

Always fresh. Always consistent. Always strong

PermaQuick®

Two-part bonding system

Black Mini Brush tip

#1432 - 500pk

Inspiral Brush tip

#1033-I - 500pk

• Highest bond strength

• 40-month shelf life

• Primer improves with age

• Radiopaque bonding resin

• Technique insensitive

• Tissue-kind primer, 1.82 pH

• Direct placement

• Cures with all lights, even LEDs

• Optimal dentin and enamel conditioning

PermaQuick Primer has a one-of-a-kind chemistry. The tissue-kind, ethyl alcohol, neutral pH primer contains natural, light polymerizable resins that help facilitate penetration into hydrophilic dentin substrates. These natural resins also provide a degree of elasticity, dissipating curing stresses and creating higher flexibility. PermaQuick Primer provides the optimum preparation for PermaQuick Bonding Resin, which is a 45% filled, fluoride-releasing, light cured bonding resin that penetrates into primer treated tubules and inter-tubular spaces. PermaQuick Bonding Resin is as radiopaque as dentin.

USES

Minimal film thickness makes PermaQuick great for indirect bonding. PermaQuick Bonding Resin is also used alone as an enamel bonding resin wet composite as needed between incremental layers or when sculpting. It bonds to cast metal3, porcelain, amalgam3, dentin/enamel4 and composite.

LIGHT CURE INDIRECT

Etch and prime application, light cure. Apply PermaQuick bond resin to preparation. DO NOT LIGHT CURE! Apply luting resin to veneer. Seat veneer. Light cure bond resin and luting resin simultaneously.

Strongest two-resin system!

Highest bond strength to chemical cure composite.*

HIGHEST BOND STRENGTH PERIOD. 65.88 MPa!

(78.0 MPa highest of set)

PQ1®

SINGLE RESIN BONDING

• High bond strength helps prevent microleakage

• Minimizes post-op sensitivity

• Antimicrobial properties

• Radiopaque

• Technique insensitive

• Direct placement

• Cures with all lights

Blue Micro tip

#1436 - 500pk

Inspiral Brush tip

#1033-I - 500pk

PQ1 is a syringe-delivered, single-component, light-cured bonding agent that uses ethyl alcohol as a solvent. PQ1 is 40% filled and is radiopaque.

USES

PQ1’s unique and patented chemistry bonds to dentin/enamel, cast metal, porcelain, amalgam and composite. PQ1 is also effective for indirect procedures where light curing is possible.

ETCH

PRIME/BOND IN ONE

FINISHED RESTORATION

NOTE UNSURPASSED FILLER PENETRATION FOR HIGH STRENGTH BONDING

Ultra-Etch®

ETCHANT

• Self-limiting

• Penetrates smallest fissures but won’t migrate

on a vertical surface

• Increases bond strength and reduces sensitivity

• Precise placement

• Rinses cleanly – no residue

Ultra-Etch is a viscous 35% phosphoric acid solution. The optimum level of viscosity, along with the use of the Blue Micro or Inspiral Brush tip, facilitates precision placement and superior control. Ultra-Etch is self-limiting in its depth of etch (average depth of 1.9ìm with 15 second etch)2, thus creating an etch pattern that adhesives can penetrate for increased bond strength and reduced sensitivity. Contemporary studies demonstrate Ultra-Etch is the optimum “total etch” etchant.

Though Ultra-Etch is viscous, it can penetrate into the smallest fissures or occlusal surfaces due to physical and chemical properties that promote capillary action. The optimum viscosity of Ultra-Etch maintains a layer thick enough to prevent premature drying.

USES

Ultra-Etch’s ideal viscosity combined with its precision delivery allow placement of the etchant in any location, including lingual approaches to Class lll restorations. Ultra-Etch works nicely for etching before bonding composites, sealants or bonding adhesives.

USE PEAK LC BOND RESIN

WITH ULTRA-ETCH FOR A

TOTAL-ETCH TECHNIQUE

1.9μm depth

Ultra-Etch phosphoric acid is proven to be uniquely self-limiting in its depth of etch, with an average depth of 1.9ìm using 15 second etch. Liquid phosphoric acid (37%) showed an average of 5.0ìm at 15 seconds, and a competing “polymer thickened” etchant a 4.8ìm depth.3 Acids with this greater depth of etch go beyond the optimum level and increase the potential for incomplete resin impregnation.

Clinical experience and FE-SEM evaluations3 show that 15 seconds etch time on both dentin and enamel provides optimal conditioning of both tissues. Air/water rinse. Blot excess water off, leaving surface visibly wet.

TOP RATED 12 YEARS RUNNING!

Ultradent®

Porcelain Etch & Silane

Black Mini Brush tip

#1432 - 500pk

Inspiral Brush tip

#1033-I - 500pk

1 MINUTE ETCH – 1 MINUTE SILANE

• Etch is easy to control and place

• Will not stain composite or resin cement

• Highest porcelain-to-resin bond strengths

• Single-component silane

Ultradent Porcelain Etch is a buffered, viscous, 9% hydrofluoric acid. Silane is a single-component solution.

USES

Designed for intraoral or extraoral porcelain etching. Use to etch porcelain or old macro-filled composites prior to bonding and repair. Also used when in-office etching of indirect restorations, such as veneers, inlays, etc, is required. Follow porcelain etching with Silane application. Studies have demonstrated that Silane, when used with Porcelain Etch and Peak LC Bond, PQ1 or PermaQuick Bonding Resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.

Ultradent®

Porcelain Repair Kit

Etch , silane , bond resin & flowable composite

• Includes all necessary pre-composite placement

materials

• High bond strengths

• Quick, easy repairs without mixing

USES

Porcelain repair procedures are becoming more common. It is financially advantageous and less invasive to repair, rather than replace, a chipped porcelain restoration. The Ultradent Porcelain Repair Kit contains all the products and tips needed for use with composite to porcelain, porcelain to metal and porcelain to porcelain repairs.

1. Diamond cut porcelain surface.

2. Same porcelain following one minute etch with Ultradent Porcelain Etch.

1. Porcelain Etch is delivered from the Inspiral Brush tip to prepared porcelain, after placement of EtchArrest barrier.

2. Silane is applied, followed by Ultra-Etch and Peak LC Bond Resin.

EtchArrest®

Acid barrier /Neutalizer

• Includes all necessary pre-composite placement

materials

• High bond strengths

• Quick, easy repairs without mixing

Black Micro tips

#1435 - 500pk

When hydrofluoric acid contacts enamel during porcelain repair procedures, formation of calcium fluoride occurs and bond strengths to enamel drop significantly.2 Therefore, it is vital to treat porcelain and tooth structure separately, with appropriate acids. EtchArrest isolates hard and soft tissues when rubber dam placement is not practical.

Protects adjacent porcelain and soft tissue from hydrofluoric acid. Etch dentin simultaneously with Ultra-Etch while etching porcelain with Ultradent Porcelain Etch to keep hydrofluoric off dentin (hydrofluoric will prevent quality adhesion to dentin and enamel). Rinse clean, apply Ultradent Silane, apply Peak LC Bond or PQ1 Bonding adhesive, apply PermaFlo Dentin Opaque Masking Resin (see PermaFlo) and restore with Vit-l-escence.

Ultra-Blend® plus

LINER

• Controlled, precise, syringe delivery

• No mixing necessary

• Will not dissolve over time

• Light cured when clinician is ready

• Radiopaque

Black Micro tip

#1435 - 500pk

Black Mini tip

#1433 - 500pk

Ultra-Blend plus is a light-activated, radiopaque, water insoluable material, with calcium hydroxide and calcium hydroxiapatite in a urethane dimethacrylate base. Compared to other liners, Ultra-Blend plus is highly filled for minimal shrinkage and water absorption

PROVEN BEST FOR PULP CAPPING.

1. Use Ultra-Blend plus for near pulp (pink) and small non-hyperemic exposure. If larger exposure and/or hyperemic pulp, initiate endodontic therapy

2. Apply Consepsis antibacterial solution with plastic Blue Mini Dento-Infusor for 60 seconds with gentle scrubbing action. Gently air dry (don’t rinse).

3. With Black Micro tip, apply Ultra-Blend plus to dry dentin at exposure border (or over thin pink dentin); cover exposure and light cure. Minimize dentin coverage to maximize available dentin for bonding

4. Etch and bond using Peak LC, PermaQuick or PQ1 bonding instructions and restore composite.

Consepsis®

CHLORHEXIDINE ANTIBACTERIAL SOLUTION

Blue Mini DI tip

#1440 - 500pk

Black Mini tip

#1433 - 500pk

• Longest and most effective antimicrobial activity

• Reduces risk of recurrent caries

• Reduces potential for post-operative sensitivity

• Increases bond strengths slightly with many

dentin bonding agents

Chlorhexidine hand soaps can adversely affect bond strength with dentin bonding agents. Consepsis is a 2.0% chlorhexidine gluconate solution free of surfactants or emollients that interfere with bond strength.

USES

Minimize post-op pulpitis and sensitivity by thoroughly cleaning and disinfecting the preparation prior to sealing and restoring. Use prior to crown cementation, luting (provisional and/or permanent) and direct restorative placement. Consepsis helps address microorganisms in dentinal tubules. Use Consepsis for procedural endodontic disinfection as well. During pulp capping, acidic etchants and hemostatic agents can cause disastrous effects on the pulp. Disinfect with near-neutral Consepsis, which can also be used to passively control non-hyperemic bleeding.

Use Consepsis prior to DBA application to disinfect root surface with sensitive root treatment or when bonding.