INSIPIRED TO IMPROVE ORAL HEALTH®
Impressions
PrepQuick is a 2% glycolic acid, which removes contaminants from the preparation and minimally affects the smear layer. A clean preparation reduces surface tension and allows for a lower wetting angle, improving reproduction of detail and fewer air bubbles. It does not interfere with the bond of temporary or permanent cements, and is designed to rinse off cleanly.
Chromaclone®
COLOR CHANGING ALGINATE
• Great Walterberry and Bubble Gum flavors
• Color-changing
• Low-dust mixing
• Silicone-like consistency
• Unsurpassed accuracy
• Time in mouth: Regular 80 seconds, Fast 53 seconds
A fast-setting, color-changing, Class A, Type I sodium alginate. Formulated to be stiffer than conventional alginates to increase accuracy. The change in color indicates time for
mixing, loading, and tray insertion. Quick setting time makes it perfect for gaggers.
Chromaclone® PVS
HYDROPHILIC POLYVINYL SILOXANE
IMPRESSION MATERIAL
SUPER LIGHT
WASH/LIGHT
MEDIUM/MONOPHASE
HEAVY BODY
• Hydrophilic and thixotropic
• Dimensionally stable with great elastic recovery
• Pour at convenience
• Tear resistant
• Accurate with multiple pours
• Time in mouth: Fast 2 minutes & Regular 3 minutesChromaclone
Chromaclone PVS impression material is super hydrophilic not only during application, but also during immediate pouring of gypsum. It contains special reinforcing branched silicone resins for fabulous tear resistance, so impressions can be removed from the mouth easily. Bubble gum flavor gives the patient a more pleasant impression making experience. Chromaclone PVS remains dimensionally stable for weeks–pour at convenience.
The accuracy of any impression material, including Chromaclone PVS, can be increased with the use of Ultradent’s Tissue Management System, page 42. Profound hemostasis is paramount before making impressions.
Clone™ Bite
BITE REGISTRATION MATERIAL
BITE REGISTRATION
• Exact bite registration
• Fast 60 second set
• Thixotropic
• Very hard: 95 Shore A
Perfect for preliminary impressions for crown/bridge procedures and temporaries.
Chromaclone® PVS Mixing Tips
• Auto-Mix
• Color-coded mixing tips to match
Super Light = Yellow Mixing Tip
Light = Yellow Mixing Tip
Medium = Pink Mixing Tip
Heavy = Green Mixing Tip
CloneBite = Green Mixing Tip
Yellow IntraOral Tips attach to Yellow Mixing Tips
PrepQuick®
Black Micro FX tip
#1434 - 500pk
PrepQuick cleans while leaving tubules occluded
PrepQuick, rinse, dry and impress.
Result: A quality impression.
Clonebite makes an accurate impression for an exact bite registration
FX Impression Tips
FIRST AND ONLY!
  • End impression bubbles and voids
  • Superior material adaptation
FX Impression tips end impression bubbles and voids by actively brushing our highly hydrophilic Chromaclone PVS into place. Use Luer Lock with Ultradent’s Chromaclone PVS and Impression syringes. Use Non Luer Lock with GC Plastic Syringe*, GC COE Impression Syringe*, Kerr FREE-FLO Syringe*, Centrix Standard Impression Syringe* and ESPE Elastomeric-Syringe*.
1.Obtain profound hemostasis using the Tissue Management technique. Firmly wash and dry.See the technique on SOLUTIONS
2. Brush the Chromaclone PVS wash/injection impression material firmly against the preparation, including the margin.
Disposable Impression Trays
• Moldable
• Rigid to prevent distortion
• Excellent retention
IMPRESSION TRAYS
12PK 36PK
#5070 #5071 - Maxillary Left - Mandibular Right
#5072 #5073 - Maxillary Right - Mandibular Left
#5074 #5075 - Maxillary Large Size 1
#5076 #5077 - Maxillary Medium Size 3
#5078 #5079 - Maxillary Small Size 5
#5080 #5081 - Mandibular Large Size 2
#5082 #5083 - Mandibular Medium Size 4
#5084 #5085 - Mandibular Small Size 6
#5086 #5087 - Anterior
Chromaclone® PVS Accessories
GUN
#5100 - Dispensing Gun
PUTTY
#5040 - Chromaclone PVS Putty
1 - each 250g Base & 250g catalyst
2 - Scoops
TRAY ADHESIVE
#5101 - Tray Adhesive 10ml Bottle
LAB Silicones
SILICONI C+
ORMALAB 75
A polysiloxane based, condensation type material, exclusively
designed for extra-oral use in the dental laboratory.
Ormalab 75 is indispensable whenever high quality performances
are required.

Technical data:
- Hardness (after 24h): 75 (±3) Shore-A.
- Perfect compatibility with cold-curing acrylic resins.
- High precision in details reproduction.
- Long lasting dimensional stability.
- Very high compressive strength and recovery from deformation.

Intended use:
- Matrices for fixed and total prosthesis.
- Prosthesis repairs.
- Matrices for temporary crowns and bridges.

cod. M7500        Ormalab 75 1600g (900 ml)
cod. M7510        Ormalab 75 5kg
cod. M7520        Ormalab 75 5kg + 4 Ormactivator Lab

ORMALAB 95
A polysiloxane based, condensation type material, exclusively
designed for extra-oral use in the dental laboratory.
Ormalab 95 is indispensable whenever high hardness and
heat-resistance are required.

Technical data:
- Extremely high heat-resistance: over 120°C without alterations.
- Hardness (after 24h): 95 (±3) Shore-A, comparable to gypsum
during the milling phase.
- Perfect compatibility with self and heat curing acrylic resins.
- High precision in details reproduction.
- Long lasting dimensional stability.

Intended use:
- Matrices for fixed and total prosthesis.
- Duplications.
- Prosthesis repairs.
- Matrices for temporary crowns and bridges.

cod. M9500        Ormalab 95 1600g (900 ml)
cod. M9510        Ormalab 95 5kg
cod. M9520        Ormalab 95 5kg + 4 Ormactivator Lab
ORMACTIVATOR LAB

Activator for Ormalab 75/95.
Sale format: Ormactivator Lab 35ml

cod. M7590        Ormactivator Lab

Dental Clinic Products
       

ALGINATES
ALGINMAJOR

Dental alginate impression material.
•Its excellent dimensional stability allows casting of the impressions even after 5 days (if impressions are correctly stored in sealed containers).
•Dust free alginate. Excellent gypsum compatibility.
• Very high compressive strenght and recovery from deformation, exceeding ISO requirements.
•Snap setting. Lead and cadmium free.
• Flavour:fruits.
• Colour: orange.
• Setting time: 2'.
•Shelf life : 6 years.
cod. A1000         Alginmajor 1x450 g
cod. A1004        Alginmajor 4x450 g
cod. A1024        Alginmajor 24x450 g
ALGINMAX

High precision chromatic dental alginate. .
• Its excellent dimensional stability allows casting of the impressions even after 5 days (if impressions are correctly stored in sealed containers).
• Dust free alginate. Excellent gypsum compatibility.
• Very high compressive strenght and recovery from deformation, exceeding ISO requirements.
• Flavour: vanilla - mint.
• Colour: pale blue.
• Setting time: 2'.
• Shelf life: 6 years.
       

cod. A2000        Alginmax 1x450 g
cod. A2004        Alginmax 4x450 g
cod. A2024        Alginmax 24x450 g

ALGINKID

Orthodontic alginate for detailed impressions.
• Very fast setting time. Its excellent dimensional stability allows casting of the impressions even after 5 days (if impressions are correctly stored in sealed containers).
• Good flavour suitable for the younger patients.
• Excellent gypsum compatibility.
• Lead and cadmium free.
• Excellent biocompatibility.
• Flavour:fruits.
• Colour: yellow.
• Setting time:1'50".
• Shelf life: 6 years.
       

cod. A3000        Alginkid 1x450 g
cod. A3004        Alginkid 4x450 g
cod. A3024        Alginkid 24x450 g
ORMADENT PUTTY

Polysiloxane based, condensation-curing material for preliminary precision impressions. ISO 4823:1992, Type 0 Very high consistency (putty).
· Supple, non-stick material.
· Very high compressive strength and recovery from deformation. · Adequate total working time.
· Easy mixing control thanks to the chromatic contrast with the gel catalyst. Ormadent Putty formulation, based on synthetic spheroidal silicas fillers, performs the maximum fluidity combined with perfect final dimensional stability. Ormadent Putty, due to its excellent initial flowing and final rigidity, guarantees the best results for all impression techniques. Ormadent Putty is the ideal support when employed in the "two-stage putty/wash technique" and it ensures the perfect cohesion between putty and light materials in the "single-stage double mixing technique". This leads to the realization of high precision impressions.
       
cod. M1000        Ormadent Putty 1500 g (900 ml)

       

CONDENSATION CURING SILICONES

ORMAMAX LIGHT

Polysiloxane based, condensation-curing material for second precision impressions. ISO 4823:1992, Type 3 Low consistency (light bodied).


- Very high compressive strength and recovery from deformation.
- Adequate total working time.
- Easy mixing control thanks to the chromatic contrast with the gel catalyst.

Ormamax Light specific formulation guarantees the optimal initial fluidity for an easy intraoral product flowing
Oramamax Light doesn't drip, it is syringeable and directly applicable on the preparation.
Ormamax Light consistency and high hydrocompatibility guarantee a perfect reproduction of fine details in every clinical condition.
Ormamax Light is the ideal product when employed both for the "single-stage double mixing technique" and for the
"two-stage putty/wash technique".
       

cod. M2010        Ormamax Light 150 ml (165g
ORMAMAX REGULAR

Polysiloxane based, condensation-curing material for precision impressions. ISO 4823:1992, Type 2 Medium consistency (medium bodied).


-· Very high compressive strength and recovery from deformation.
-· Adequate total working time.
-· Easy mixing control thanks to the chromatic contrast with the catalyst.
Ormamax Regular specific formulation guarantees an easy intraoral product flowing.
Ormamax Regular consistency ensures a perfect reproduction of fine details in every clinical condition. Ormamax Regular is the ideal product when employed to realize functional impressions or to obtain accurate reproductions when combined with Ormadent Putty, in the "two-stage putty/wash technique".
       

cod. M2000        Ormamax Regular 150 ml (205 g)
ORMACTIVATOR GEL / LIQUID

Activators for Ormadent Putty, Ormamax Light, Ormamax Regular.

cod. M1090        Ormactivator Gel 35 ml
cod. M2000        Ormactivator Liquid 20 ml
ADDITION CURING SILICONES

A+ Silicones
ORMAPLUS PUTTY

Polyvinil siloxane based, addition curing, elastomeric precision preliminary impression material.

Ormaplus Putty is available in two versions:
Putty Fast providing a fast intraoral setting time (4') which is pleasant for patients.

Putty Soft providing reduced final hardness (60 Shore-A) indicated for problematic clinical situations (patients with periodontally compromised residual dentition).

Ormaplus Putty is designed to provide the highest precision in details reproduction and a perfect chemical bonding to light-bodied impression materials.

Ormaplus Putty can be kneaded smoothly and it can be easily removed from patient's mouth thanks to its elastic properties.

Ormaplus Putty formulation guarantees high tear resistance and compressive strength combined with an excellent elastic recovery.        


cod. M3020        Ormaplus Putty Fast        900 ml / 1380 g (450 g Base Paste+ 450 g (catalyst)
cod. M3030        Ormaplus Putty Soft        900 ml / 1360 g (450 g Base Paste + 450 g (catalyst
ORMAPLUS LV

Polyvinyl siloxane based, low viscosity, addition curing material, for second precision impression.

Ormaplus LV is available in in two verions:
• Fast set (indicated for the "two step putty/wash technique") providing a reduced introral setting time (2'45") for a better comfort of the patients.

• Regular set (indicated for the "one step putty/wash technique") providing a standard intraoral setting time (4'00").

Ormaplus LV formulation, the hydrophilicity of the product is more marked and leads to the realization of very detailed impressions even in presence of oral fluids.

Thanks to the high tear-resistance of Ormaplus LV, the interdental septae reproductions are not ripped while removing the impression from the mouth or while casting the model.        



cod. M3000        Ormaplus LV Fast set        100 ml / 128 g (2x50 ml + 12 Mixing Tips)
cod. M3010        Ormaplus LV Regular set        100 ml / 128 g (2x50 ml + 12 Mixing Tips)
ORMAPLUS Bite

Fast setting, polyvinyl siloxane based, addition-curing bite registration material.

Ormaplus Bite due to its very high final hardness is easily milled and it performs permanent dimensional stability and an extraordinary precision in bite registrations.
Thanks to its thixotropic properties, Ormaplus Bite is easy to apply.
INTENDED USE
· Syringeable bite registration material, also indicated for use in centric occlusion.
· Material for coating bite registration forks.
· A locating material, such as for Gothic arch tracings.

       
cod. M3040        Ormaplus Bite        100 ml (2 x 50 ml + 12 Bite Tips)
ORMAPLUS MONOPHASE

Medium viscosity, addition curing, monophase impression material.

INTENDED USE:
· Material for taking impressions over fixed/removable restorations and implants.
· Material for functional impressions.
· Monophase impression material for crowns and bridges or inlays.
· Syringeable impression material for the simultaneous mixing technique as well as the sandwich, putty/wash and triple tray techniques.
· Medium viscosity material for reline impressions.
· Medium viscosity monophase impression material for transferring root posts when fabricating posts and cores indirectly.
· Copper ring impressions.

       
cod. M3011        Ormaplus Monophase        100 ml (2 x 50 ml + 6 Mixing Tips)
MAJOR TOTAL SOFT

Permanently soft, polyvinyl siloxane liner for direct and indirect use.
Biocompatible, antibacterial, anallergic material. It doesn't release monomer and heat.
Intended use:
· Direct liner
· Therapeutical medium
· Stabilizing medium
·Temporary material
· Indirect liner
· Repairing material
Main Features:
· Major Total Soft has fluid consistency, it is easy to apply and it prevents air voids being entrapped during the dispensing of the material.
Thank to its high resilience and final softness, Major Total Soft is well tolerated by patients.
The silicone soft liner is a hydrophobic material and, combined with its relevant sealer (Silicone Sealant), it avoids liquids absorption and protects the prosthesis from infiltrations.
Major Total Soft is monomer free.
Major Total Soft is biologically inactive.
The adhesive (MTS Adhesive) bonds the silicone soft liner to the denture acrylic reliably.
Major Total Soft is smooth and dimensionally stable.
Major Total Soft resists to the tensions exerted by masticatory loads.
The silicone surface has no porosity and inhibits bacterial settling.
Major Total Soft can be used directly by the dentist or it can be processed in a laboratory using standard reliners.
The material is fully odourless and it doesn't lose colour.
Major Total Soft is supplied in a pale rose colour suitable for every aesthetical need.
       
cod. M3500        Major Total Soft Standard set
cod. M3501        Major Total Soft Refill package
Shqip
For Retailed Information,please contact our Offices.
Anything wrong?!Please email us.